| Mastercarver Micro
Pro and Bench-Top Pro Rotary Tools
All prices are in
Candian Dollars
|
|
Micro
Pro Set w/ Variable
Speed Foot Pedal
Includes handpiece, 3/32" & 1/8" quick
change collets, cradle, variable speed power supply, variable speed
foot
pedal, spare motor brushes, fuse, instructions and a 1-year warranty.
|
$425
|
Most champion carvers use micro handpieces like these to
create better detail. Higher carving speeds give superior carving
results, smoother texturing, plus improved detailing, stoning &
feathering. At up to 50,000 rpm, the Micro-Pro has the speed, superior
features & quality you want for hundreds of dollars less than
others. For better control, power flows to the handpiece by a 6’
flexible cord. Use the dial or the variable foot pedal to adjust the
speed from 0 to the top speed. Control features, fuse & reset
protection, 110/220 Volt selector, reverse switch (direct chips away
from you or reduce effects of grain). Handpiece features high torque,
fan cooled micro motor, sealed ball bearings, hands-free bit changes
(1/4 turn releases or locks bits). Variable foot pedal works hands-free
to control the rotational speed while you carve. Handpiece
specifications; 50,000 rpm: length 5-7/8", diameter 1/2"-1", weight
6.38 oz.
|
|
Micro
Pro Set with On/Off
Foot Pedal
Same contents and features as above with the exception that
the foot pedal provides an on/off function for the handpiece; speed can
only be controlled from the dial on the power supply. Useful for making
quick stops to safely get in close and check detail of workpiece.
|
$350.00
|
|
|
50,000
RPM Micro
Pro Handpiece
Replacement or additional handpiece.
|
$299.95
|
| (no image) |
Micro
Pro Quick Change
Collet: 1/8"
Adapts your micro motor handpiece to accept popular 1/8"
shank burrs. Fits all Mastercarver® Micro-Pro machines.
|
$25.95
|
| (no image) |
Micro
Pro Quick Change Collet:
3 mm
Adapts your micro motor handpiece to accept internationally
popular 3mm shank burrs. Fits all Mastercarver® Micro-Pro machines
|
$25.95
|
|
(no image)
|
Micro
Pro Handpiece
Wrench
For replacing the tri-faced collet (i.e. 1/8"). Micro-Pro brand, but
also works for Ram, Foredom micro motor tools and most others.
|
$8.25
|
|
|
Micro
Pro Motor Brushes
Replacement set of motor brushes fits all Mastercarver Brand Micro-Pro
handpieces. Includes 1 pair.
|
$10.95
|
|
|
1/8"
to 3/32" Collet Adapter
Slides into 1/8" collets to allow them to accept 3/32" shank
accessories without changing the collet. Ideal for micro motor tools
such as the Micro-Pro and other micro motor handpieces.
|
$10.95
|
|
|
1/8"
to 1/16" Collet Adapter
Slides into
1/8" collets to allow them to accept 1/16" shank accessories without
changing the collet. Ideal for micro motor tools such as the Micro-Pro
and other micro motor handpieces.
|
$10.95
|
 |
Bench-Top
Pro Flexshaft Set
Enjoy the benefits of
rotary and reciprocating power carving anywhere! It's motor features
1/3 horsepower, 26,000 RPM with forward and reverse plus special
features for better portability.
|
$299.75
|
|
The rugged base has
non-slip rubber feet, pre-drilled for wall or semi-permanent mounting
plus built-in variable speed dial control & advanced electronics
for full power & precise speed adjustment (0-26,000 RPM). Set
contains motor with flex-shaft, 3 handpieces (rotary &
reciprocating) plus burrs or blades for each. The Stealth handpiece
(patent pending) has a key-chuck and adjusts 0-1/4" to accept
accessories with 1/4" or smaller shanks, without collets! Great for
roughing out! The 2nd rotary handpiece is the ultra thin (1/2") Detail
Pro, hold it like a pencil for best control, perfect for detailing; it
accepts 1/8", 3/32" & 1/16" shanks (collets included). The 3rd
handpiece is the Recipro-Carver Pro it includes 5 different blades for
hand carved effects without the work (accepts Flexcut blades). Set
includes motor, 3 handpieces, 9 burrs, 5 gouges/chisels and manual.
Includes 2 year motor warranty.
|
If
you can't
find what you're looking for
or have a specific request, please feel free to contact us at:
|
