Products:

Home News Artists Gallery Chapter News Order Info Links Contact Us

Proxxon Saws

All prices are in Candian Dollars



37006 - Circular Saw KS 115

Cutting Depths: In wood up to 5/16" (8 mm), in plastic (also circuit boards) up to approx. 1/8" (3 mm), in non-ferrous metals up to 1/16" (1.5 mm).

$190.00

The machined and perfectly plane aluminum worktable in size 6 1/4" x 6 1/4" (160 x 160 mm) allows for sliding the work piece easily. The housing is made of sturdy plastic (ABS) with a side door to conveniently remove saw dust.

With the included 2-9/32" (58 mm) diameter Super-Cut Saw Blade it is possible to cut soft wood up to 5/16" (8 mm). Other Proxxon saw blades, at 2" (50 mm) diameter still ensure up to 15/64" (6 mm) cutting depth.

Overall size approx. 10-1/4" x 7-5/8" x 3-11/64" (265 x 195 x 85 mm). Weight approx. 4 lb (1.8 kg).

Blades available for the KS 115 Circular Saw:

28011 - Tungsten Carbide Saw Blade
2" (50 mm) diamter x 1/64" (0.5 mm), bore 13/32" (10 mm), fine toothed, 80 teeth. The blade is ideal for cutting fiberglass sheets, non-ferrous metal, miniature moldings, plastics, and other difficult-to-cut materials.
$46.50

28020 - HSS Saw Blade
2" (50 mm) x 1/64" (0.5 mm), bore 13/32" (10 mm), fine, 100 teeth. The blade is ideal for fine precision cuts in non-ferrous metal (aluminum, brass, copper), wood and plastic.
$12.80






37070 - Table Saw FET

Speed:  7,000 rpm
Cutting Depth: 1/32" to 5/6" (1 - 22 mm)
Table Size:  12" x 12" (300 x 300 mm)
Mitre:  Adjustable up to 45 degrees
Volts:  110 - 120 V AC, 60 Hz
Weight:  11.5 lb (5.25 kg)


$519.00

Perfectly straight cuts. For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters.

For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and many other materials. Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium.

The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 0.004" (1/10mm) can be made after coarse adjustment using an adjusting screw. The height is adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with the angle stop.

Low-noise drive using DC special motor with compound belt driver. Ball-bearinged saw blade shaft. Tungsten tipped saw blade 3-9/64" (80mm) x 1/16" (1.6mm) x 13/32" (10mm). Additional work piece pusher and non-slotted ABS sawing gap cover for tight tolerances between saw blade and table.

The machine may be used with all blades from 2" to 3-11/32" (50 - 85 mm) in diameter that have a 13/32" (10 mm) bore.

Blades available for the FET Table Saw:


28731 - Crosscut Blade Super-Cut
3-11/32" (85 mm) diameter x 1/64" (0.5 mm) thick, bore 13/32" (10 mm), 80 teeth.  Ideal for use on hard and soft wood, as well as plastics.
$24.35


28732 - Carbide Tipped Saw Blade
3-9/64" (80 mm) diameter x 1/16" (1.5 mm) thick, bore 13/32" (10 mm), 36 teeth. Used for balsa, plywood, hard or soft woods, polycarbonate, plastic, and PC boards.
$37.90


28734 - Carbide Tipped Saw Blade
3-9/64" (80 mm) diameter x 1/16" (1.6 mm) thick, bore 13/32" (10 mm), 24 teeth.  For cutting more difficult separate materials like aluminum, hardwood, chipboard, fiberboard and plastics.
$29.50




37160 - Micro Chop and Miter Saw KGS 80

Cutting Capacity at 90 deg:  1" ( 25 mm)
Cutting Capacity at 45 deg:  3/4" ( 20 mm)
Speed:  6,000 rpm
Volts:  110 - 120V AC, 50/60 Hz
Power:  200 W
Table area:  9" x 9" (230 x 230 mm)
Weight:  12 lb (6 kg).

$325.00

Ideal for miter cuts: Instead of swivelling the saw head, the table with clamped work piece is turned!

The laterally moving saw head (Patent DP 103.18.479.1) prevents colliding of the saw blade with the vise jaws. This allows for a minimal gap between the work piece vise and the actual cut, which is vibration-free and leaves no burr. Base with round table of pressure-cast aluminum and CNC-machined guides and fittings!

By using the longitudinal fence stop (overhang 12" / 300 mm) and counter-rotating the table 2 x 45°, you can get the opposite angles for two equally long framing pieces by simply reversing them. Powerful, very quiet DC motor. Power transfer via quietly operating toothed drive belt. Complete with carbide tipped saw blade 3-1/8" x 1/16" x 3/8" (80 x 1.6 x 10 mm), 24 teeth.

Blades available for the KGS 80 Chop and Miter Saw:


28732 - Carbide Tipped Saw Blade - 36 teeth
Extremely clean cutting edges when cutting balsa wood, plywood or soft wood as well as glass-fiber reinforced plastics (GRP) because of the large number of teeth. May also be used for cutting hard wood, polycarbonate, plastics and aluminum. 3-1/8" x 1/16" x 3/8" (80 x 1.6 x 10 mm)
$37.90




37088 - Proxxon Scroll Saw DS 115/E

This is the ideal machine for that delicate project: model building, toy manufacturing and precision work. It cuts soft wood up to 1-3/16" (30 mm), hard wood up to 25/64" (10 mm), plastic (including circuit boards) up to approx. 5/32" (4 mm) and non-ferrous metals up to 5/64" (2 mm) with standard scroll saw blades.

$199.00

The machine has a very stable ribbed die-cast aluminum saw frame with 11-13/16" (300 mm) throat. The blade guide is equipped with an integrated blower. The patented head is height-adjustable in 3 positions and offers advantages like close, precision sawing and extending the life of the blade.

The machined worktable of die-cast aluminum has a size of 6-19/64" x 6-19/64" (160 x 160 mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0-90°).

The saw is powered by a 110-120V motor (85 W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2500 strokes/min.

Blades available for the DS 115/E Scroll Saw:

28108 - "Super-Cut" Normal Toothed Scroll Saw Blades - 17 TPI

High quality steel for extended use and prolonged cutting capacity. Ideal for cutting soft and hard woods, fiberglass, Plexiglass and soft, non-ferrous metals. Standard version (without pin). 5-1/16" x 3/64" x 1/64" (130 x 1.2 x .38 mm) 6 blades in package.

$6.15


28107 - "Super-Cut" Fine Toothed Scroll Saw Blades - 25 TPI

High quality steel for extended use and prolonged cutting capacity. Ideal for cutting soft and hard woods, fiberglass, Plexiglass and soft, non-ferrous metals. Standard version (without pin). 5-1/16" x 1/32" x 1/80" (130 x .77 x .30 mm) 6 blades in package.

$6.15






37090 - Proxxon Scroll Saw DSH/E

Larger than the DS 115/E Scroll Saw, this is the perfect machine for scoll saw relief projects, intarsia, precision mechanics, model building, toy or puzzle making, designs and restoring antiques.

Speed:  200 - 1,400 strokes/min.
Stroke length: 3/4" (19 mm)
Throat: 15-3/4" (400 mm)
Cutting depth: 2" (50 mm), 1" (25 mm) at 45°
Overall size:  21" x  10.5" x 12" (30 cm)
Motor:  200W
Volts:  110-120V AC, 50/60 Hz
Weight:  44 lb. (20 kg)


$390.00


Even with its superior cutting efficiency, the DSH/E emits only a quiet hum while cutting wood up to 50 mm (1-1/2"), plastic up to 30 mm (13/16"), and non-ferrous metals up to 10 mm (13/32"). The DSH/E also cuts effortlessly Plexiglas, fiberglass, foam, leather, or cork.

The free swinging saw blade holder takes standard saw blades with pin ends. However, blades without pin ends may also be clamped safely by means of a toggle screw. The slender saw arm allows for a clear view to the back of work piece, and a quick tension release lever is ideal for frequent inside cuts. The dust blower with adjustable nozzle ensures clear sight of the work piece and cutting line. The base is solid cast iron with rubber feet minimizing vibrations (may also be bolted down).

The table is extremely stable with a large work area of 14-5/32" x 10-1/2" (360 x 270 mm) and can be tilted 45° for miter cuts. Vacuum cleaner and dust extractor are side-mounted allowing for a dust-free environment. The machine comes with five coarse and five fine saw blades each.

Blades available for the DSH/E Scroll Saw:

28740 - Standard Blades with pin ends:Coarse blades - 10 TPI
Ideal for cutting soft and hard wood, plastics as well as other soft (and above all else) thicker materials. 6 blades, 5" (127 mm) long.


$6.75



28742 - Standard Blades with pin ends: Fine blades - 18 TPI
Ideal for cutting soft and hard wood, as well as other thinner materials and plastics. 6 blades, 5" (127 mm) long.

$6.75



28744 - Standard Blades with pin ends: Very Fine blades - 25 TPI

Ideal for cutting non-ferrous metals, plastics, fiberglass, acrylics and wood. 6 blades, 5" (127 mm) long.

$6.75


28108 - SuperCut Scroll Saw Blades (no pins): Normal-toothed - 17 TPI
Ideal for cutting soft & hard wood, fiberglass, plexiglass & soft non-ferrous metals. 6 blades, 5-1/16" (130 mm) long.


$6.15

28107 - SuperCut Scroll Saw Blades (no pins): Fine-toothed blades - 25 TPI
Ideal for cutting soft & hard wood, fiberglass, plexiglass & soft non-ferrous metals. 6 blades, 5-1/16" (130 mm) long.


$6.15

28746 - Spiral Saw Blades (no pins)
Spiral saw blades provide teeth all the way around and thus allow for cutting in all directions without the need to turn the work piece. This is advantageous, especially with bigger work pieces. The saw blade fits through a 1/16" (1.5 mm) hole. 6 blades with plain ends (no pins), 125 mm long.

$4.75





37172 - Micro Band Saw MBS 115/E

Speed:  395 - 820 ft/min (with feedback control)
Throat depth:
  5-29/32" (150 mm)
Max work piece height:
  3-13/32" (85 mm)
Table Size:
  7-7/8" x 8-11/16" (200 x 220 mm) (adjustable 0 to 45°)
Volts:
  110-120V AC, 60 Hz

$450.00

Perfect cuts in steel, non-ferrous metals, wood, plastics and glass and ceramics. Note: the cutting of glass and ceramics should only be attemted in conjunction with the coolant system (below).

A solid, ribbed die-cast aluminum housing (not a tubular or sheet metal construction) ensures the necessary stability. The machine has double ball bearing aluminum pulleys, a sturdy machined table with a slot for the miter gauge as well as the coolant trough. The worktable tilts up to 45° for accurate miter cuts. The low noise 110-120V motor (high quality, for quiet, prolonged use) operates via toothed belt. Electronically controlled speeds for exceptionally accurate cutting (no subsequent finishing necessary) are available from 395 to 820 ft/min. A practical table at the outside of the machine housing indicates the recommended speed for various types of material. The blade size of 13/64" x 1/64" (5.0 x 0.4 mm) is ideal for fine work, allowing to cut even smallest radii. The machine is equipped with a vacuum-cleaner adapter to help you work in a dust-free environment and comes with one 42" x 13/64" x 1/64" (1065 x 0,5 x 0,4 mm) band saw blade (14 TPI).

Blades and attachments for the MBS 115/E Bandsaw:


28180 - Special Tempered Swedish Steel Blade
Induction hardened teeth, coarse toothed at 14 TPI. The size is 42" x 9/64" x 1/64" (1065 x 3.5 x 0.4 mm). Ideal for plastics, non-ferrous metals & wood. This blade is extremely narrow for cutting the tightest curves & radii.

$25.50


28186 - Diamond Coated Blade
42" x 7/64" x 1/64" (1065 x 3.0 x 0.3 mm). Ideal for cuts in glass, stone, ceramic or fiberglass reinforced plastics. As the blade is extra narrow, it is optimal for cutting tightest curves and radii in hard materials.

$163.00


28187 - Blade Guide
The triple ball bearing system with feed pipe for coolant in connection with the diamond blade allows even more precise adjustment of the blade when working on glass, ceramic, stone or fiberglass reinforced plastic.

$26.20





38530 - Super Jig Saw SS 115/E

A precision tool for cutting! Small and comfortable. With gear head of die-cast zinc. 110 - 120V. Max. Power: 1/8 hp (100W). Speed: 2000 - 4500 rpm. Length: 8" (230 mm). Weight: 1.5lb (700g).
$195.00


This tool offers fantastic cutting capacity with the base plate adjustable up to 45° for miter cuts. The slim and stable gear head is made of die-cast zinc for exact bearing seats. Main housing made of fibreglass reinforced polyamide. Special, balanced, low noise DC motor with high life expectancy. Full-wave electronics for speeds continuously variable from 2000 to 4500 rpm. Ideal for tight curves in wood up to 1" (12 mm), circuit boards up to 3/16" (5 mm), non-ferrous metals up to 1/8" (3 mm) and plastics. Comes with 4 Supercut saw blades of different tooth pitches for wood, plastics or metal.

Blades available for the SS 115/E Super Jig Saw:


28054 - Jig Saw Blades - Special Steel $5.80
For cutting hard and soft wood, plywood, fiberglass reinforced materials and various soft plastics. Especially designed for sawing tight curves and making clean cuts. Teeth are alternately set and sharpened. Contains 2 blades.
Size:  2-1/4" x 7/64" x 1/64" (57 x 2.9 x .5 mm)
Tooth Pitch:  1/16" (1.5 mm)


28056 - Jig Saw Blades - High Speed Steel $7.00
For cutting metals, especially aluminum and softer alloys, fiberglass, Plexiglass and insulating materials. Teeth are alternately set and sharpened. Contains 2 blades.
Size:  2-1/4" x 7/64" x 1/64" (57 x 2.9 x .5 mm)
Tooth Pitch:  3/64" (1.06 mm)



You may also be interested in:

                       
Proxxon 12 Volt Jig Saw STS 12/E or the Proxxon FS Footswitch








If you can't find what you're looking for or have a specific request, please feel free to contact us at:

Tel: 905-257-8423   Fax: 905-460-0794
Email: info@nutmegwoodworking.ca

*Prices are subject to change without notice*

Copyright © 2017 Nutmeg Woodworking and Carving Shop, Inc.